Hauppauge Capture
Camera Zone Assignments
- All
cameras must be defined using the same device type and that type selected
in the General configuration tab.
This step is required to have all the cameras listed in the
available cameras.
- Select
a security zone in the table, click on the appropriate camera for that
zone and click the Assign button.
The assigned
camera will appear next to that security zone.
- If the
camera that is being assigned to a zone does not use a
standard X10 camera power supply (eg: uses an appliance module to control
power to a camera or RF sender unit), the “Selected Camera uses
nonstandard X10 power supply’ box must be selected before “Assign”ing the
camera. This ensures the
proper switching on and off for cameras.
Back